铝薄膜CMP影响因素分析

提出了在碱性抛光液中铝薄膜化学机械抛光的机理模型,对抛光液的pH值、磨料、氧化剂浓度对过程参数的影响做了一些试验分析。试验结果表面粗糙度的铝薄膜所需的最优化CMP过程参数:硅溶胶粒径为15～20nm,pH值为10.8～11.2,氧化剂浓度为2.5%～3%。     

BaxSr（1—x）TiO3多层膜椭偏光谱研究

用溶胶－凝胶技术在Bi(100）衬底上制备了单层和渐变型多层的BaxSr(1-X)TiO3薄膜，其膜层组分分别为：Ba0.7Sr0.3TiO3,Ba0.8Sr0.2TiO,Ba0.9Sr0.1TiO3,BaTiO3，对生长制备出的多层BaxSr(1-X)TiO3薄膜进行了变角度椭偏光谱测量，通过椭偏光谱解谱分析研究，首次得到了BaxSr(1-X)TiO3多层膜结构不同膜层的膜厚和光学常数，其结果显示：椭偏光谱分析得到的不同膜层的膜厚与卢瑟福背向散射测量得到的结果基本相符；渐变型多层膜中BaTiO3薄膜的折射率比单层BaTiO3薄膜折射率大许多，与体BaTiO3的折射率相接近，这说明渐变型多层膜中BaTiO3薄膜的光学性质与体材料的光学性质接近。     

Measurement Method of the Thickness Uniformity for Polymer Films

Several methods for investigating the thickness uniformity of polymer thin films are presented as well their measurement principles.A comparison of these experimental methods is given.The cylindrical lightwave feflection method is found to can obtain the thickness distribution along a certain direction.It is simple and suitable method to evaluate the film thickness uniformity.     

利用谱分解技术进行薄储层预测

采用短时窗离散傅里叶变换的频谱分解技术,实现了在频率域内通过调谐振幅的成像特征来研究储层横向变化规律的目标,最大限度地挖掘了地震资料主频至高频端的地震分辨能力。本文介绍了谱分解技术的基本原理、谱分解数据体的类型及其解释方法,充分利用谱分解得到的一系列单一频率的调谐振幅数据体研究辽河盆地东部凹陷西斜坡铁匠炉地区近源沉积砂砾岩储层,查清了该套储层沉积相带的平面分布和有效储层横向展布特征,预测结果已被钻井所证实。     

Simulations of Temperature Field in HFCVD Diamond Films over Large Area

A three-dimensional model was developed to investigate the influence of various hot filaments parameters on substrate temperature fields that significantly affect the nucleation and growth of diamond films over large area by hot-filament chemical vapordeposition (HFCVD). Numerical simulated results indicated that substrate temperature varies as a function of hot filamentsnumber, radius, temperature, emissivity, the distance between filaments, and the distance between substrate and filamentsarrangement plane. When these filaments parameters were maintained at the optimal values, the homogeneous substrate temperature region of 76 mm×76 mm with the temperature fluctuation no more than 5% could be obtained by a 80 mm×80 mmhot filaments arrangement plane. Furthermore, the homogeneous region could be enlarged to 100 mm×100 mm under thecondition of supplementary hot filaments with appropriate parameters. All of these calculations provided the basis for speciallyoptimizing the hot filaments parameters to dep     

二氧化锡溅射工艺研究

SnO2 是最早使用也是目前使用最广泛的一种气敏材料 ,使用该材料设计制作的气敏传感器具有许多优点。在简要介绍溅射镀膜的成膜过程和特点的基础上 ,着重介绍了SnO2 膜的制备流程 ,分析了功率和温度变化对成膜质量的影响     

Investigation into polishing process of CVD diamond films

A new technique used for polishing chemical vapor deposition (CVD) diamond films has been investigated, by which rough polishing of the CVD diamond films can be achieved efficiently. A CVD diamond film is coated with a thin layer of electrically conductive material in advance, and then electro-discharge machining (EDM) is used to machine the coated surface. As a result, peaks on the surface of the diamond film are removed rapidly. During machining, graphitization of diamond enables the EDM process to continue. The single pulse discharge shows that the material of the coated layer evidently affects removal behavior of the CVD diamond films. Compared with the machining of ordinary metal materials, the process of EDM CVD diamond films possesses a quite different characteristic. The removal mechanism of the CVD diamond films is discussed.     

ZnLiFeO_3高温热敏厚膜材料的研究

ＺｎＬｉＦｅＯ３（ＺＬＦ）高温ＮＴＣ热敏厚膜材料，是以尖晶石结构的ＺｎＬｉＦｅＯ３导电陶瓷作厚膜浆料的导电相，以Ａｌ２Ｏ３瓷为基体，用厚膜工艺制成的。实验表明，在氮气中烧结的ＺＬＦ厚膜材料，室温方阻１０３Ω／□级，Ｂ值约１０００Ｋ。在高温５００～７００℃范围内，方阻降为１０２Ω／□级，Ｂ值仍小于１０００Ｋ。是一种很有前途的高温热敏材料。     

工艺参数对纳米颗粒Cu/SiO_2复合薄膜结构和光谱特性的影响

用离子束溅射法制备了具有反常光吸收特性的纳米颗粒CU／SiO2复合薄膜。获得了在离子来参数一定时，基片温度、膜料的沉积时间和镀膜后的保温时间等工艺参数对这种薄膜结构和光学特性的影响规律，并对纳米颗粒Cu／SiO2复合薄膜的反常光吸收特性作了计算和解释。     

L－B膜修饰电极循环伏安行为模拟──（Ⅰ）电荷转移速度常数对循环伏安性能的影响

本文用计算机数字模拟方法研究了电活性分子多层Ｚ型Ｌ－Ｂ膜修饰电极的循环伏安行为。计算了电极与修饰Ｌ－Ｂ膜分子第一层之间的电荷转移速度常数Ｋ_ｏ，Ｌ－Ｂ膜分子层间的电荷转移速度常数ｋ_ｉ；对峰电位差△Ｅ_ｐ及阳极峰面积Ｑ的影响，以及在不同条件下各层分子的氧化态分数随扫描时间的变化。为研究和设计电活性分子修饰电极的实际体系提供了大量数据和信息。